| Performance (Composite & S-video) |
| Differential Gain | <0.2% |
| Differential Phase | <0.5° |
| Gain | ± 0.15dB |
| Signal-to-Noise Ratio | >65dB |
| Frequency Response | Composite: 10Hz to 100MHz, -3dB |
| S-Video: 10Hz to 8MHz, -3dB |
| Compatibility | NTSC, PAL and SECAM |
| A/D Converter | 12-bit, 110MHz |
| D/A Converter | 12-bit, 74.25MHz |
| Input Level/Impedance | 1V peak-to-peak/75Ω |
| Output Level/Impedance | 1V peak-to-peak/75Ω |
| Performance (Component Video) |
| Impedance | 75Ω |
| Bandwidth | >100MHz |
| Insertion Loss | <3dB |
| Compatibility | 3-channel (Y, Pr, Pb) format-independent |
| Frequency Response | 10Hz to 100MHz, -3dB |
| HDMI Performance |
| HDMI Input | Video: 480i/p, 576i/p, 720p or 1080i |
| Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz) |
| HDMI Output | Video: 480i/p, 576i/p, 720p or 1080i |
| Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz) |
| Inputs |
| HDMI (Version 1.1) | 2 HDMI Type A, 19-pin connectors |
| Analog Video | Three component video, RCA connectors |
| Four S-Video connectors |
| Four composite video, RCA connectors |
| Digital Audio | Four S/PDIF coaxial (RCA) and four S/PDIF optical (Toslink) connectors (coaxial and optical input connectors conform to IEC-956, S/PDIF standards) |
| One USB mini-B connector |
| Analog Audio | One 8-channel input array, RCA connectors |
| Six stereo RCA connectors |
| One microphone, 3.5mm mono mini plug |
| 1 dock 30-pin connector (for optional docking station) |
| Control | One RS-232, 9-pin, D-sub connector |
| One IR receiver, on front panel |
| One 3.5mm IR in jack - input voltage: 3v - 15 , input current: 10mA, frequency: 20Hz - 1kHz, accepts either stereo plug (tip/ring/sleeve) or mono plug |
| Outputs |
| HDMI (Version 1.1) | One HDMI Type A, 19-pin connector |
| Analog Video | One component video, RCA connector |
| One S-Video connector |
| One composite video, RCA connector |
| Analog Audio | One 8-channel pre-amplifier plus additional subwoofer, RCA connectors |
| Zone 2 analog out, 1 RCA stereo connector |
| Control | Two triggers - one power on/off and one programmable, 3.5mm mono mini plugs, 12VDC, 300mA maximum output draw |
| Performance (Main Zone and Zone 2) |
| A/D Conversion | 24-bit, 96kHz, dual-bit |
| D/A Conversion | 24-bit, 44.1 to 192kHz, multi-bit |
| Input Sensitivity | 200mV for analog 1 to 6, and 200mV for 8-ch input |
| Max input level: 2Vrms |
| Input Impedance | 98.5kΩ for analog 1 to 6, and 32kΩ for 8-ch input |
| Frequency Response | 10Hz to 40kHz, +0, -2dB |
| THD + Noise | <0.05%, 20Hz to 20kHz |
| Dynamic Range | 100dB typical, 22kHz bandwidth |
| Signal-to-Noise Ratio | 100dB typical, 200kHz bandwidth, min 100dBA, 103dBA typical |
| Output Level | 200mV typical, 6Vrms maximum |
| Output Impedance | 570Ω |
| General |
| Power Requirements | 90-250VAC, 50-60Hz, 50W (universal line input), IEC detachable power cords (supplied) |
| Power Consumption | 3.76W at power on, idle, 47.2W at rated power output (HDMI in/out mode) |
| Dimensions | Height (with feet): 5.0 inches (127mm) |
| Height (without feet): 4.3 inches (109mm) |
| Width: 16.8 inches (426mm) |
| Depth: 16.7 inches (423mm) (includes knobs, buttons and terminals) |
| Weight | Net weight: 17.6lb (8kg) |
| Gross weight: 26.5lb (12kg) |
| Rack Mounting | Lexicon built rack mount kit not available. Please seek alternative |
| Operating Environment | Operating temperature: 0 to 45°C (32 to 113°F) |
| Storage temperature: -20 to 60°C (-4 to 140°F) |
| Relative humidity: 93% max without condensation |
| Remote Control | Hand-held, back-lit, IR/RF (RF for use with optional RF-1 receiver) pre-programmed and learning remote control (requires 4 AAA batteries - included) |
